 |
||||||||||||||||
 |
 |
 |
||||||||||||||
 |
 |
|||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
||||||||
 |
 |
|||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
||||||||||||||||
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Positioning Devices
It is recommended that a source stop be held in position with the source positioning kit. The kit is comprised of a tripod stand, adjustable clamp, and clamp holder.
Tripod Stand, Adjustable clamp, and Clamp holder (Complete Kit)
Item No. TAN4021
Positioning Clamp
Item No. 40201-7
Clamp Holder
Item No. 40201-8
Cast Iron Tripod Base
Item No. 40201-9
Tripod Rod
Item No. 40201-9A
Pipe Centering Devices & J-Tubes |
||
Description |
Size |
Item No. |
Wheel |
6 in to 12 in (152 mm to 305 mm) |
TAN731 |
|
12 in to 24 in (305 mm to 610 mm) |
TAN732 |
|
24 in to 48 in (610 mm to 1210 mm) |
TAN733 |
Slide |
1 in to 2 in (25 mm to 51 mm) |
TAN7341 |
|
2 in to 4 in (51 mm to 102 mm) |
TAN7342 |
|
4 in to 6 in (102 mm to 152 mm) |
TAN7343 |
J-Tube Assembly |
|
91500 |
These devices are designed to hold a radiography source in the center of pipes or other cylindrical vessels, and are especially useful where panoramic radiographs are needed.
Spring loaded wheel and slide types are available to maintain the source stop in the center of the pipe and yet pass freely over the welds. Used with rigid source tubes the devices can be pushed easily along distances up to the limit of the source projector.
They are available with threaded fittings on both ends
(compatible with the guide tubes), or the standard male
thread at one end and an integral source stop on the other.
The standard length is 7 feet.
Other lengths are available upon request.
Source Positioning Kit